Print Article for : Installing A Windows Service

Your Online Guide » Home Decor » Home Management

[I321]Installing A Windows Service

by Bill Brennan, Bil

Once you have decided that this is what you would like to do, you will need to decide on the size and positioning of your skylight. There are many styles possible; tubular, round dome, square dome, segmented pyramid, modular pyramid. It is important that you consider carefully how this is going to affect the design and look of your home.

If you are purchasing a pre-made skylight, follow the instructions from the manufacturer carefully.

Remember that you are about to put a hole in your roof, so be prepared for any unforseen circumstances. Have a tarpaulin and some rope on hand, just in case you are held up for any reason.

Mark the position of the skylight from the inside, ensuring that it fits alongside the existing ceiling joists. Now get up on the roof, taking all your tools and equipment with you. You do not want to waste valuable time going back and forward fetching forgotten tools.

Locate the position of your skylight and begin removing tiles. When you are sure of your position, cut the battens and then the rafters as required. Finally saw the hole in the plasterboard.

Beware of any electrical cabling which may be running through your work area.

Place your skylight into position and fix it to the framing. Check that the skylight is level at both the upper and lower sides of the frame.

Depending on your particular style of skylight you will now need to install the flashings. This is an important part of the job because; if these are installed incorrectly you will experience leaking. Flashing can be moulded into place using a soft wooden block to gently beat the metal into the shape of the tiles.

Once flashings are in place, replace the tiles. This may involve cutting the tiles. Once this is done you are finished with the outside part of the job.

Now you will need to fit plaster board into the rebate between the skylight and the ceiling. Measure your plasterboard carefully and nail it into place. Once this is done apply joining cement for an even finish. Metal angles can help strengthen joins and give a straight line to work with. Once you have finished your plastering sand, dry and paint for a neat finish on the inside of your new skylight.

Your new skylight will bring natural light and a feeling of warmth to your home.

In fact, installing a sauna kit or a pre-built sauna is really a easy job. If you have proficiency in handling some basic tools, this should not pose any problem for you. The pre-built saunas are even easier than a kit - you simply assemble it with the help of an Allen key.

What's the Difference?

In a sauna kit, there are some simple precut pieces which have to e put together with the help of some tools. The pre-sauna is even easier since it contains two or three large pieces which have to be assembled to get the sauna ready for use.

Since in the pre-built sauna, all the assembly has been previously done, the cost of this is slightly higher than a sauna kit of the same size. This extra cost is nothing compared to the time you save in assembling the kit. The pre-built saunas can be set up in less than an hour.

Sauna Kits

Sauna kits require some levels of skill in handling tools. It is cheaper than if you were to install a sauna from the beginning. It also saves time. The wood and other materials are all pre-cut. So simply read the instructions and fit them together.

One of the biggest advantages of a sauna kit over pre-built saunas is that it can fit into any closet or a small room. The pre-built saunas are bigger in size and can not fit into existing places. Hence they are used as freestanding saunas.

Sauna kits come in all convenient shapes and sizes. You could even have a custom-built sauna kit to accommodate your sauna in the space available.

You have to provide the framework and electrical wiring, before you install a sauna kit. If you are thinking of converting a small room into a sauna, you have to take off the existing wall boards from the frames. After this, the frame work has to be insulated. A plastic vapor barrier needs to be installed over the insulation to restrict the vapor flow.

To install the sauna heater, you may require an electrician. Then the sauna kit is fitted onto the frame work and electrical connection is given to the heater. This could take a days work, of course everything depends on the size of the sauna and the time you can devote to the installation.

Prebuilt Saunas

Pre-built saunas, also called modular saunas are much easier to install. It contains two or three pieces which have to be connected together. It can be accommodated anywhere. The wiring and lighting are already pre-built. Some saunas carry the heater and other related accessories as well.

If you have decided to go for the pre-built saunas, make sure that the individual pieces can be taken through your doorways. Most companies marketing pre-built saunas specify the door sizes required to the pieces through comfortably.

One of the biggest advantages of the pre-built saunas is that they are portable. You may not like to carry it with you for your vacations, but if you ever decide to sell your house, you may easily dismantle it and take it along to your new home.

Likewise, a permanent sauna may increase the re-sale value of your home and the extra money can enable you to install a new sauna in your new home.

Article Source : Pg. 104

About Author

Both Bill Brennan & Karina Jacobsen are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.

Bill Brennan has sinced written about articles on various topics from Home Management, Food and Drink and Home Management. For your next DIY project why not or. Bill Brennan's top article generates over 2900 views. to your Favourites.

Karina Jacobsen has sinced written about articles on various topics from Health, Acupuncture Chiropractor and Fitness. Karina Jacobsen is a staff writer at and is an occasional contributor to several other websites, including. Karina Jacobsen's top article generates over 6600 views. to your Favourites.