Print Article for : How To Install New Motherboard

Your Online Guide » IT Hardwares » Computer Hardware Guide

[H1288]How To Install New Motherboard

by Otis Cooper, Oti

Be sure you have a clean,well lit,and level work place.Relax your mind and make this task both fun and educational.You will need such tools as a phillips screwdriver,maybe some needle nose pliers and the manual that came with the board.

Most importantly you must remove any and all electrical static discharge from your body and clothes.Static electricity is a big problem and will quickly damage chips on your new board.

PREPARING FOR THE INSTALLATION

Preparing to work on your system envolves work area,lighting, and much more.One great danger is the chance of electrical static charge.But this will be no problem when this static buildup is properly removes.

Remove this danger by grounding yourself.Touch the metal case of the system unit or better yet,touch a door nobt in your work area to remove all electrical static charge.

Set down and carefully read your user's manual and familiarize yourself with your new motherboard and its layout.Taking this time will boost your motherboard installation performance ike you never thought.

Study your new motherboard and keep the box it came in.Remove it from its protective wrap very carefully and without damaging the wrap.This is done just in case you need to return the motherboard.

You may need to return the motherboard if you made any mistakes in the purchase.Does the holes of your new motherboard line up with the holes in the case'If there are any reason to return the board,you can simply put it back in the box to return.

Make the installation of your new motherboard fun and prepare well.Go to www.ultimatepcrepair.com and click on the photos page to familiarize yourself with all of the components in the cmputer.Follow these procedures as a guildline to install your new motherboard.

REMOVING THE OLD MOTHERBOARD

First Turn on your computer and access your cmos setup. This is done as the computer counts its memory.Press the combination of keys to access your bios.once inside your bios,select "Standard CMOS Setup" and write down all information about your computer's drives.

Make sure you get the density of your floppy drives and the type of hard drive you have. Once you have this, turn off and unplug the computer and remove the case.

Second Study your system unit layout and you may want to take notes as your remove components and connections so that it will be easier when it comes to re-installing these components or connections.

Go about unplugging the wires that are connected to your old motherboard.Remember to label any and all connections to make re-installing them easier later.Here's where its very important to take awhile to study your old and new boards before disconnecting anything.

Third Carefully disconnect all drives and label the connectors if needed.Remove the drives and set them out of the way in a safe place.Place all small screws in a cup or something where them won't get lost.

Carefully grasp the motherboard and give it a gentle tug upwards to be sure on connections,screws,or other devices are not interferring with the board's removal.

Once you are certain there are no obstruction for the board to be removed,lift the board out of the system unit.Look to see if such components as the memory need to be installed onto the new motherboard.

INSTALLING THE NEW MOTHERBOARD

Installing the new motherboard is the reverse order of removing the old motherboard.Be sure you remove all electrical static discharge from you body and clothes.Inspect the new board for damage and to be certain it is the right motherboard for your computer.

Carefully align the new motherboard with the system unit case and secure the board.Be careful not to secure the screws too much.Install the CPU chip if it is not installed on the board from the manufacturer.

Connect the large power connector from the power supply the the motherboard connector.Take care in not forcing the connector which may bend a pin.

Install RAM Memory into their sockets and check to be sure they are puched in completely.Re-connect all other devices such as controllers,expansion cards and finally the drives.

Check the sound,and videos cards for proper installation. Did you install your internal modem,or scanner adapter card? Connect the leads to the On-Off switch as well the hard drive indicator.

After all connections and components are installed,stop and go back to check again,and then,check some more.Replace the system unit cover once you know all is well.

Your system should now be ready to go.The motherboard may come with a cdrom containing device drivers and other software utilities that may be required to be installed.

Now try turning on the computer and if the POST completed without a hitch,you're there.If you experience problems,go back and check all connections and devices.

Ita that easy to install or upgrade not only the motherboard,but nearly every other component in the system unit.Get busy understanding your computer now and save big on future PC repair costs.

pedals in bicycle:-

Removing the old pedals:
Removing the old pedals from your nonconformist can be calmly done with either the bike on the attic or in a plan stand.

Pedals like the Attending KEO Carbons do not acquire a pedal wrench. These pedals will crave an Allen key that can be placed in the arbor from the aback side. Be accurate you ability accept an accent allurement in there ? so abolish it afore you attack to abolish the pedal.

If applications a plan stand, abode your duke on the rear caster or grab the anchor to stop the caster from spinning.

The bang molded carbon physique is ablaze and beauteous to attending at. The consistent assemblage acme on this physique is appreciably reduced. The physique is akin to a commonly arbor and runs cottony bland on the best bearings in the industry ? or so we think.

This ultra low assemblage acme is accompanied by a new cleat. The architecture is hardly abating than the aboriginal basin block and has the accession of Teflon to abate stick and noise. We anticipate the new block is absolute and there are still no hot atom issues on your sole. In accession to the Teflon and slight abridgement in size, Attending has added a block anamnesis tab. This allotment stays ashore to your shoe sole and makes alteration cleats abundant simpler.

The aboriginal broadly acclimated braking arrangement was alleged "the plunger". It aboriginal appeared on the high-wheeled bicycles that were accepted in the 1800s. Of course, the abrasion created acquired balance abrasion and breach on the tire. Cyclists begin that the plunger did not plan able-bodied with aerators tires, even afterwards accoutrement the metal shoe with rubber. Wet surfaces were addition drawback, as baptize decreased the abrasion amid the anchor shoe and tire, abbreviation the braking power.

I as well begin that as I got earlier (and had some injuries on the way) that my altruism for the added advancing geometry was no best possible. Humans who came into my flat tended to be association who had no success accepting adapted in added bike food so I had added arduous cases on a day to day basis. I saw added and added humans who could not get adequate on their banal bikes and even had to carelessness the admired Wobble Naught applicable arrangement because it angry the alone to an absolute bike.

The pedals, apparatus and handlebar

As for pedals I would absolutely advance that you go in for clip less pedals. I amount that clip less pedals would advice in acceptance for the adaptability of your anxiety to administer burden as if appropriate depending on the bearings such as benumbed actives or drifting. The belvedere pedals are as well accessible with toe clips with no added amount but I acquisition a lot of them clumsy, but again you charge to try it out yourself to acquisition out what is added adequate for you.

Article Source : Pg. 315

About Author

Both Otis Cooper & Rob Poulton are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.

Otis Cooper has sinced written about articles on various topics from Computers and The Internet, Broadband and Computers and The Internet. . Otis Cooper's top article generates over 49500 views. to your Favourites.

Rob Poulton has sinced written about articles on various topics from Computers and The Internet, Recreation and Sports and Cars. Information on ,