eg: UK or Brides UK or Classical Art or Buy Music or Spirituality
 
eg: UK or Brides UK or Classical Art or Buy Music or Spirituality
 

Your Online Guide » Home Decor » Home Management

[H1539]How To Refinish A Hardwood Floor
by Rex Ryan, Rex

Hardwood floors are an excellent investment for any home, promoting resale value and interior warmth. However, if the floors are not properly cared for, this investment won't yield as well. Hardwood floors are not hard to maintain, and compared with carpet and other surfaces that are more difficult to clean or require replacement, hardwood floors can be considered relatively low maintenance. But proper care is essential to keep the floors in good shape, and to give them a nice shine.

As with all flooring, hardwood floors must be cleaned, but they must be cleaned correctly. The correct way to clean urethane-stained floors is to mop them with a damp mop. Using vacuum and bristle brooms daily will help keep the floor clean. But when it comes time to really clean the floor, use a damp mop. Allowing dirt and grime to collect on the floor, and walking on this grime over as period of time can damage the finish. Using a small amount of water shouldn't hurt the finished wood, but don't pour out water and mop it like you would with kitchen tile. A damp mop or dust rag is all that should be needed, and it should be light enough in water that it will dry in minutes. Be sure to understand what type of finish your floor has, and what the suggested cleaning methods are. Using soaps and oils can void manufacturer warranties on many floors.

Another way to protect hardwood floors is to use throw rugs or walk-off mats in areas of high traffic. For example, in the entry way where people come in through the house, the traffic is likely to be greater in an isolated spot, and thus the floors will wear unevenly in this spot. This would make a great place for an area rug. Watch your floors over time, and consider putting some sort of rug or other type of protection on areas that receive more wear. It is especially important to use rugs on wood floors in kitchens in front of sinks and stoves.

Floor protectors on the bottom of furniture is highly recommended. You will want to pay special attention to rolling chairs with rubber wheels like those often found in offices. These chairs have a tendency to leave rubber trails on the wood floors. If you have such a chair, consider putting a rug underneath it.

There are two primary finishes on hardwood floors: urethane finishes and wax. You should never wax a urethane finished floor. If your urethane floor is extremely worn, you may need to refinish it which will involve sanding and applying sealer. However, if you clean the floor regularly, using only soaps recommended by the manufacturer, and you protect problem areas, you should avoid needing to refinish the floor for many years.

Wax floors require occasional waxing. It really isn't a lot different than cleaning and waxing your car. You will need to clean the floors first, and buff areas that are worn with high traffic. Occasionally, you will need to buff on additional wax in the worn areas. With wax finished, just as with urethane finishes, you should know the manufacturers recommended care procedures.

With proper maintenance, your hardwood floors should last for the lifetime of your house, and look shiny and new for many years.


1. Don't cut your prep work short. Proper Preparation is the most important key to achieving a nice looking floor. While sanding away the old finish with a power belt sander, always sand in the direction of the grain in the wood. Avoid start and stop marks and feather sand areas that need it. This helps eliminate a splotchy appearance, by allowing a more even absorption of stain.

2. Proper clean up is crucial. Proper clean up is also where a lot of people go wrong. Once you have sanded all the old stain and varnish from the wood, you have to remove all dust and debris from the floor and cracks. Vacuum the floor thoroughly and use a crevice tool to help lift dust and debris from cracks and crevices. Once you have completed a thorough vacuuming of the floor, use a tack cloth on the entire area to pick up any remaining particles. The tack cloth will remove more debris that the vacuum cleaner can't remove. Many people make the mistake of forgoing this step. Don't leave off this very important step. It will help you achieve a clean mirror smooth surface.

3. Stop air flow in the room. Once you have cleaned the room you will need to stop dust from getting to your work area. Air flow brings dust into the room. Close all windows, doors, and heating and air vents. Keep all people and pets out of the room as they will track small particles of dust and hair onto the floor. Resume normal air flow after you have stained the wood, and the final coat of varnished applied to the floor has had time to dry to touch.

4. Use a wood conditioner before applying stain. Wood conditioners even out the absorption of stain in wood. This will achieve a more even appearance of color. You will have less of a splotchy appearance.

5. Be sure and maintain a temperature range in accordance to the recommendations specified on the product labels. Improper temperature will effect the drying time of the products. Too hot or too cold can cause streaking, crawling and film formation problems.

6. Mix stain properly. If you have several gallons or quarts of stain, then box them all together so that your stain is uniform. Furthermore, remember that the solids in stains settle to the bottom of the can. It's real important to stir the stain very well making sure the solids are no longer settled to the bottom of the cans. Otherwise, your stain color will not be accurate.

7. Strain your top coat finish. Pour the top coat finish through a cone strainer or a five gallon pail paint strainer to remove any solid finish particles from the top coat finish product prior to application.

8. Your top coat needs to be a minimum of 3 mils thick. Two coats usually will achieve this and will also leave a more uniform sheen.

Remember to allow adequate time for the finish to cure. Cure time is usually 2 to 3 weeks. So be careful how you slide furniture or objects across the uncured floor. You don't want to negate all your hard work.
Article Source : Pg. 200

About Author
Both Rex Ryan & Nicky Taylor are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.

Rex Ryan has sinced written about articles on various topics from Computers and The Internet, Broadband and Home Management. Rex Ryan is a hardwood floor bargain hunter, and maintains a website on .. Rex Ryan's top article generates over 12100 views. to your Favourites.

Nicky Taylor has sinced written about articles on various topics from Computers and The Internet, Painting and Hair Care. Nicky Taylor CEO Of
EditorialToday Home Decor has 1 sub sections. Such as Home Decor. With over 20,000 authors and writers, we are a well known online resource and editorial services site in United Kingdom, Canada & America . Here, we cover all the major topics from self help guide to A Guide to Business, Guide to Finance, Ideas for Marketing, Legal Guide, Lettre De Motivation, Guide to Insurance, Guide to Health, Guide to Medical, Military Service, Guide to Women, Pet Guide, Politics and Policy , Guide to Technology, The Travel Guide, Information on Cars, Entertainment Guide, Family Guide to, Hobbies and Interests, Quality Home Improvement, Arts & Humanities and many more.
About Editorial Today | Contact Us | Terms of Use | Submit an Article | Our Authors