Industrial warehouse managers are continuously searching for new ways to economically light their surroundings, and commercial warehouse lights are leading the way in the commercial and industrial business sector. This ground-breaking development in the lighting industry is gaining high standing among commercial business owners. Commercial HID lighting fixtures, better known as high intensity discharge, offers many benefits.
Companies can provide a wide selection of commercial warehouse lighting fixtures that include metal halide fixtures, HPS (High Pressure Sodium Lights) floodlights, low bay lights, high bay fixtures, wall-pack lighting fixtures, work lights, bollard lights, and security lighting fixtures.
Commercial warehouse lighting offers some of the most intense illumination to the naked eye. Take for example a 35 watt HID (High-intensity discharge lamp), and put side by side to the standard incandescent bulb. The High-intensity discharge lamp fixture can produce up to 6 times the amount of light as its incandescent predecessor. Many commercial high-intensity discharge lamp devices are equal to that produced by sunlight. Although not natural in its purest form, the white light produced from these commercial light fixtures can improve overall side-line vision, as well as, improve visibility. In aviation, a commercial HID lighting fixture plays a significant role in bad weather situations. The combination of a more natural light and the snow white coloring of high-intensity discharge light results in greater lumens output, which allows planes to land and takeoff in safety.
How does a commercial high-intensity discharge lamp work? In simple terms, running a current through a metal vapor can scatter illumination. These devices basically take a standard light bulb and replace the existing filament with a gas capsule. Light is then dispelled from an arc with adjoining electrons which are enclosed in a tiny quartz glass part that is shaped like a tube. In order for these commercial lighting fixtures to operate well, ballasts are required. Ballasts provide the right amount of voltage to the light fixture, while controlling the current at the same time. Most of these lighting fixtures have a delay time of about 15-20 seconds before reaching full power.
Some Benefits of Commercial Warehouse Lighting Fixtures include greater illumination output, produces whiter light, 3-5 times longer life than incandescent bulbs, and can save up to 30% on energy bills.
Tips For Using Commercial Warehouse Lighting Products
Safety measures should be followed, in order to determine the highest quality from your lamp.
Keep the quartz glass clean, to allow for proper lighting to be dispersed.
Commercial lighting fixtures produce UV rays so extended exposure to this light source should be avoided.
Do not stare at your lighting fixtures for any length of time since ultra-violet radiation can be harmful to the eyes.
Never handle the light bulb, if it is operating, and always allow the bulb to cool off before changing it.
Warehouse managers should check for signs of a failing bulb which include reduced light output, arbitrary start times, and dark spots at the tip of the arc tube.
As a company owner with a warehouse, you are well aware of how important it is to have your space properly lit. There are several duties which are fulfilled by commercial warehouse lighting. These jobs include security for your products and safety for your employees. Having the right lights for these functions is vital to the productivity of your labor force and the ability to keep your products free from damage or theft. Depending upon the size of your space, you will have various options for commercial warehouse lighting. While general advice can help you narrow down your choices, it will be best to consult with an expert to answer specific questions concerning your project.
To allow your employees to work most efficiently, you will need commercial warehouse lighting to keep a large area brightly lit. You might want to install bay lighting. The type of bay lights will be based on the height of your ceiling. If your ceiling is higher than twenty feet high, then you should use high bay lighting. These are designed to light from those extreme ceiling heights without sacrificing brightness. They will be too powerful to use on ceilings of less than twenty feet high. For those you will need low bay lights.
Continuous, bright warehouse lighting of a large area for security reasons can be accomplished through the use of a flood light. If you only want the light to come on if someone enters the area, you could tie it into a motion detector that will light the lamp. Motion detectors should not be used in areas where there is a lot of movement from machinery or possible breezes after hours, since this could cause the lamp to needlessly light. You also might want to consider tying your commercial warehouse vandal proof lighting into a timer. This way you can program it to turn on and off at any time you want.
There are several bulb options for your commercial warehouse lighting. You will likely find yourself installing a high intensity discharge (HID) light bulb. There are four main types: metal halide, mercury vapor, high pressure sodium, and low pressure sodium lamps. These all operate in similar ways. They have a gas and a metal inside the lamp. When electricity is sent into the lamp, it excites the gas particles which react with the metal. Light is then produced. The brightness and coloring of the light is based on the types of gas and metal in the lamp. HID lamps and light bulbs are more energy efficient than incandescent, but keep in mind that these should not be used with flood lights tied to motion detectors. These lights need a warm up and cool down period between lighting cycles. If you are using a motion detector, it will be best to opt for either a halogen or fluorescent bulb. This will offer you the best in energy efficiency and bulb longevity for these applications. If the temperature of your commercial warehouse lighting is important, then you should not choose halogens, which can get very hot when lit. Instead, a cooler fluorescent or HID lamp will be better.
Finding the proper commercial warehouse lighting for your space is important for your employee's safety and your goods' security. Talk to an expert to get advice on your specific project, and then make your lighting choices.
Both Camille Howe & Kimberly Quang are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.
Camille Howe has sinced written about articles on various topics from Drumming Lessons, Education and Home Management. Easyrack.org for more information on or. Camille Howe's top article generates over 165000 views. to your Favourites.
Kimberly Quang has sinced written about articles on various topics from Politics, Education and Home Management. To learn more visit our section or read more about. Kimberly Quang's top article generates over 2240000 views. to your Favourites.