Latest advances make it potential for regular oak hardwoods to be engineered and oiled making it stronger and more attractive for any flooring needs. These engineered oak hardwood floorings are impressively almost the same as the traditional type of solid wood floorings when it comes to physical appearances, except that the engineered and oiled oak hardwoods offer strength and durability that you cannot enjoy with the typical type. It also offers easy installment since it is possible to install it over existing wood floors, concrete slabs, and ceramic tiles, making it more convenient for users.

Oak hardwood engineered oiled finish are made from a number of wood plies that are basically glued together. The tongue and groove is generally made from a softer wood material and it composes the center core. On top of the center core is a hardwood finish layer joined to it and underneath the core is a softer wood attached to it. This technique makes the engineered oak hardwood stable and solid, permitting it to be installed directly into concrete or lumber sub floorings.

Manufacturers of oak hardwood engineered oiled finish usually apply several coats of finish on the wood boards, typically around 7 to 10 coats, which provide a protective layer that is much harder than a self-applied finish. These gives added protection and less maintenance that could last for a couple of years. Some manufacturers put aluminum oxide for increased durability. The finishes are usually extremely wear resistant. Since the finishes are factory-applied, it can typically be installed in less than a day and is less messy. Therefore, letting you avoid all the hustles and additional time requirements compared to self-applied furnishes. Once installed, you can immediately step and walk on it.

There are a lot of ways on how to take care of your luxurious oak hardwood engineered oiled finish floorings. Always keep them in mind to preserve the beauty of your flooring. Remember never to use water in cleaning or mapping a hardwood floor, use a damp cloth or sponge only. Water can dry and dull the finish and can damage the floor permanently. Be easy on hardwood floors because they can be scratched, so be cautious that chair and table legs do not rub the floor. But scratches in the outer layer are easy to fix. Wood color may fade over time if it is always strike by direct sunlight, so always keep them away from the windows, or you can use thick curtains as to not to allow the sun's rays to enter the room. And if you have pets at home, always remove pet stains while they are still fresh. Do not allow the stains to stay on the flooring for long period of time for it can damage the floor and making it difficult for the stain to be removed.

So know that you know more about your oak hardwood engineered oiled finish flooring, you now have an idea on how to add beauty into your every own haven. Use it for your living rooms, bedrooms, dining rooms, and dens, and feel how it brings delights of comfort and elegance of your home.