|
||
The process of making a great set of knives is not as simple as it seems. There is a certain level of artistry and science that goes into knife making. If you want to learn about how the blade, grind, and handle come together to make some of the cleanest and most beautiful designs of sharp and ready-to-use knives than read on.
There are different types of finishing that can be used to make the knife have its unique look. If you have a knife that was finished in the stonewash fashion than it will have that sort of vintage or antique look right away because of the abrasive pattern on the knife. IF you get a knife with a vibe finish than it will have some abrasions, like the stonewash finish, but not quite as many.
Knives are heat treated to turn them into their sharp final products. Annealing is one step that helps knives out and treats them with high heat before they cool. Hardening allows knives to use a combination of annealing. Tempering is a process that controls how the cooling process is done on the knives.
If your knife has 13% chromium or more than most knife experts would tell you that your knife is “stainless steel.” This isn't exactly accurate because with misuse your knife could still rust. Even though this is the case, it will still take a long time for this to happen. You can also choose from non-stainless steel blades that can be even better and last longer than those that claim to be stainless steel. You may wonder why you'd want a blade that won't give you as much protection against rust, but there are reasons to consider it. Damascus steel is a combination of metals and this greats a great looking knife!
We all know that a knife is made up of a blade and a handle, and that to get a really good knife takes a certain skill in creating and sharpening the blade. If you have ever seen the components of a knife before it was manufactured, you would be surprised that it doesn't look very much like the end product at all. If you have ever been curious about how a knife is made, this article will be interesting to you, since it will explain the process of heating the metal, finishing the product and creating a knife one can be proud to own, all from a bit of steel and a properly formed handle.
The finish is the most important stage of a good knife. The creation of a jeweled metal knife starts from the inside to create the beauty you will eventually see on the outside. A special kind of finish is a stonewash finish that gives the knife a "used" look from the day you buy it by putting some abrasive marks on it. This creates an older, seasoned look that is the way you want a knife to look, not like it is in the hands of an amateur. Or you can get a knife with a vibed finish, which means that it will have smaller abrasions than the stonewash finish to look slightly worn.
In order to have the strongest, most easy to use knife as possible, the manufacturer should use teh process of annealing. This is a process whereby the metal is brought to the highest possible heat before it is cooled. Annealing is the process used to make the best knives, but it will also make them more expensive since it is a difficult process to achieve. The next heating process for making knives is hardening, which is similar to the annealing process but is a variation that will allow the metal to be heated up and then cooled. Tempering is then used to control the level of cooling of the metals after it has either been annealed or hardened.
The standard definitiion of stainless steel is when the chromium content is greater than 13% of the metal. This is waht makes it stainless. This is a bit of a misnomer, because this does not mean that the steel will never rust or degrade in quality, just that it will take a longer time than with metals where less chromium is used. It seems contrary to want a knife that will rust or degrade, but the problem is that non stainless steel blades are stronger and more durable, so the idea is to have the exact mix of a metal that will be strong but not rust easily. Less chromium will make the blade stronger, but more susceptible to rust, and more chromium will make it less susceptible to rust but not as strong. Damasucus steel is a combination of two or more metals to make the steel extra strong, but it also is made with a special style that creates a beautiful patterned surface that is very popular in custome made knives.