Remember one thing refacing a kitchen is a hard job and a huge project. You will need to have the right help and a good set of skills to do this type of work. This is not a job that you should rush into. You need to take your time and make it perfect so that you can be proud of the finished product.
Getting the right measurements when you are trying to give your home a new look is important. You need to make sure that you are accurate and exact when you are refacing your kitchen cabinets. You need to take into consideration the face fame, the openings of the doors, and the actual cabinet. When you are off just a tiny bit you will see that the material will not fit right.
You have to take time to prepare the areas that you are refacing. You should remove all the cabinet drawers and the fronts of them. Clean everything well and get the grime off of the cabinets. You should also then make the smooth areas a little bit rough so that they can take in the materials of refacing. This is something that will take time and you should do it right.
If you do not know how to reface cabinets you should make sure that you are getting the proper help. You will also need to have patience and time to make it all happen. If you do not give yourself enough time to do this job you will see that you end up rushing and it will no be perfect.
What is needed for Cabinet Refacing?
The supplies that you need for cabinet refacing are offered at many of the home improvement stores. You will find that there are pictures and step-by-step directions to make this happen correctly. You will want to make your kitchen look as professionally done as possible.
Having pressure sensitive veneer will make the refacing so much easier. This is going to be a material that will be easy to use and will have a paper back that peels right off. You can line up the veneer to the right surface and put it in place. This area is going to need to be prepared correctly. Having a solid wood veneer is going to be the best way and the easiest for the refacing job that you are doing. Using a veneer roller can be a much easier way to apply the material. These items will come in a small and a large size. You will find that the larger ones will cover more than one area. You should always start at the middle and the move outwards. This will take out the air bubbles that can totally ruin the way that your refaced cabinets look.
Using a smoothing blade can be used when you are trying to attach the veneer. You should start in the middle and then go with the grain. Be sure to use both hands to give the right amount of pressure and do this until it is attached tightly.
Using edge band iron and trimmers can be good or refinishing. The band iron is going to be needed to hook the band to the edge of the cabinet door. An iron can also do this job for you as well but you will find it to be a large item to use.
The type of the cabinet door and its shape give you the texture and feel of the wood. However, it is missing the rhythm and harmony that can come from its color and other decorations that it may have. A light colored raised panel will give the kitchen a much different look and appeal than a darker flat slab. Each cabinet door has its own personality and it must be looked at as the centerpiece of your kitchen.
There are a variety of types of a cabinet door you can get. These can range from a recessed panel, raised panel, curved panel, beadboard panel, and even a black flat slab. While the type of the door is a large part in choosing the right cabinet door for your kitchen, there are a variety of other factors that must be taken into consideration when knowing how you want to decorate the cabinet door. The items that should be looked at are the color and type of stain, the wood veneer, the color of the paint, polyester, and glass.
The type of wood you have chosen and the color you want to get go hand in hand. Some forms of wood take lighter stains much better and can accent the wood much better. This is also true for mid-range and darker colors. If you wish to have a lighter color to your kitchen, your best bet is to go with something like ash, birch, elm, oak, or maple. If you wish to have that mid-range look, a nice cherry wood will do the trick. If you would like to have that darker look, maple is the best choice here.
You may have noticed that some of the woods were mentioned more than once up above. There is a madness put behind this. When you stain a wood it is much better to go from a lighter colored wood and make it dark. It is virtually impossible to go from a dark colored wood and go lighter. To use an analogy it is easer to take a white color and make it blue. It would be much harder, if not impossible, to take the color blue and make it white. Woods such as rosewood, teak, or mahogany are prime examples to use for a clear finish. These woods have a wonderful color and a great texture.
Wood veneer is made from peeling strips of wood off of a tree. When it is pulled off it is much thinner than the normal solid wood that is used in a normal cabinet door. This type of wood is usually applied to particleboard to give is strength. The result is the door costing much less. It also has a much more consistent grain since the wood was stripped in one piece. If this is something you have chosen for your cabinet doors, make sure that you have chosen a veneer that is of the same species as the rest of the cabinet.
There is almost and endless amount of things you can do with paint. There are a variety of colors that can be chosen as well as you having the ability to pick a different look and finish. You can go with a more distressed look or give the cabinet a worn out feel by sanding down the paint.
Polyester may not be one of the looks that you would have first thought of when doing your cabinet doors. It however has the same effect as it would on your car. You can get a glossy shiny finish that can be an asset to any kitchens looks and feel. This process involves a large number of steps as well as some steps that are rather difficult to achieve. You have to apply a layer in a dust-free environment to help achieve the shiny sheen. The only downside to choosing this approach is the obvious increase in the price.
Glass is another very common choice when picking what you would like to have your cabinets look like. With the glass you can add color to it as well as texture to the glass. You even have the ability to put a Warhammer mural on the glass if you so choose. This gives your cabinets that unique feel that is hard to duplicate in any kitchen.
There are a variety of choices that one has when choosing what to do with their cabinet doors in their kitchen. Stain, paint, and even glass are all wonderful choices to look at. Each one brings their own unique look and feel to the kitchen. Keep these wonderful choices in mind when looking to upgrade your kitchen cabinet doors.
Both Eric Slarkowski & Luke Anderson are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.
Eric Slarkowski has sinced written about articles on various topics from Renovation Ideas, Family and Travel and Leisure. Eric Slarkowski usually publishes detailed articles on subjects related to kitchen cabintes and ktchen cabinets. His . Eric Slarkowski's top article generates over 22200 views. to your Favourites.
Luke Anderson has sinced written about articles on various topics from Guide Guitar, Options Trading and Used Car. The article was written by Josh Lydon. He is a writer working for . If your looking for. Luke Anderson's top article generates over 2400 views. to your Favourites.