You may soon come to the realization that even while you are planting everything you might just not have the right gardening tool for the job you are busy with, as before everything else you simply thought a spade and a rakewere all that was needed.Wrong. When you began tilling the ground you realized you needed a garden fork and even a pick, just to help loosen those big stones under the ground you didn't see when you began this project.
So off you dash, because you want to try and get as much done as you can possibly do in one day, if not finish it off. You tilled the ground, thrown in the compost or foods required for the plants. You thought you were finished with the preparatory work. Again wrong. Another gardening tool you think?
Yes, the hosepipe or the irrigation system or just the little watering can if your garden is on the small side, then again you should have these before you started as the soil needed watering before you planted anything, and also to compact it again.
Maintenance For The Garden
Ok, so you've read through the instructions on everything you bought to plant. You have the feeling that there is something that could be missing? You have the gardening tool for every job; you got the right plants and pots for whatever goes where and with what. Maintenance tools are what haven't been purchased yet.
After a season or two you will realize that you will have to go purchase the perfect gardening tool once again for maintaining all that you planted. You'll need the loppers and saws for trees, secateurs for the smaller shrubs and plants, the small rake and spade and of course the perfect lawn garden tool, the lawnmower.
A very considerable point to keep in mind is that your garden shed is also a very important gardening tool; of course it depends o how important you see anything for that matter. It should guarantee that all tools and your favorite gardening tool, the lawn mower, is stored safe and dry.
The lawnmower you select can make your life so much easier. It should at least make mulch while you mow. This does save you time and money. Factors saved are time not picking up up the cuttings (which is really a pain), and money that you don't need to buy compost in the future as the mulch turns into compost anyway.
Whether or not you're mechanically inclined, if you're like most people you at least have some kind of tool kit in your home. With all the different tools that there are, this can range from a small packet of a couple of screwdrivers, a hammer and a wrench, to a full blown box of just about everything you could possibly want.
But when something needs to be fixed, how do you know what tool to use?
Certainly if you want to hammer a nail into a wall you're not going to use a wrench to do this. But what kind of hammer would be best to use for this job? Yes, believe it or not, there are different types of hammers.
For example, There is the traditional claw hammer. This is the most popular hammer available for general chores. The claw of the hammer is naturally curved and has a V cutout to pull nails out of wood. You can also use the claw to lever up floorboards or other places where you might want to use a lever.
Then there is the ball pein hammer. The striking end, or pein, is rounded and is normally used for shaping metal and closing rivets.
Of course you have your cross and straight pein hammer. This can also be used for shaping metal. The most useful hammer for domestic purposes is the cross pein. This can be used for starting panel pins and tacks.
What tool box would be complete with the good old club hammer? This hammer has a double faced head and is usually used for light demolition work. It is great for driving steel chisels and masonry nails.
And there are others, but you get the idea. With all these hammers to choose from, if you simply wanted to hammer a nail into a wall to hang a picture, which hammer would you use? Well, you'll probably want to use the claw hammer. Why? Simple. If the nail gets bent you can use the claw portion to straighten it out or remove the nail completely if it can't be saved. None of the other hammers can do that.
What about screwdrivers?
There are different types of screwdrivers as well. The handles are all relatively the same but what makes them all different is the screwdriver tip. Below are just a few of the most common screwdriver tips.
First, you have your most common tip which is the flat head or regular tip. These are usually used with large heavy screws.
Another very popular screwdriver tip is what is called the Phillips Head. These are used on cross slotted screw heads. You'll usually find screws of this type on electronics products such as radios.
Then you have your hex screwdriver tips. These are usually used for repair work in the electronics field, mostly for TV repair. The screws are in a hexagonal shape and also used for DVDs, VCRs and other devices in this area.
So what screwdriver do you use if you want to remove the back from your portable radio? Well, you're going to have to actually look at the screw to match it up but most likely it's a Phillips Head. Trying to unscrew this with anything else will be an exercise in futility.
The right tool for the right job. It may sound corny and clichè(c)d, but it will save you a lot of aggravation in the end.
Both David Lathan & Michael Russell are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.
Michael Russell has sinced written about articles on various topics from Celebrities, Dieting and Diabetes Treatment. Michael RussellYour Independent guide to . Michael Russell's top article generates over 2240000 views. to your Favourites.