The first Step:
Herb should be ground properly
User does not pay attention towards herb grinding. It is more often overlooked. The user is required to have a herbal grinder to grind the herb finely or as per the requirement. If herb grinder is not available, coffee grinder will do. If more surface area is created by proper grinding, the heat will release more active ingredients. If both of the grinders are not available, scissors or even fingers will meet the requirements. But, at any rate, herbs should be pulverized to a fine consistency without clumps.

The Second Step:
Vaporizer should be turned on
Now, it should be turned on. As per the temperature system of the vaporizer, it should be adjusted to the requisite level of temperature. Some are digitally adjusted while some are manually.

The Third Step:
Handpiece/Whip should be Loaded
The handpiece or whip is a piece of the glass. It has mouthpiece and plastic tubing. From the end, it has a display about one or two inch. Now the ground herb should be placed on the screen. A little quantity of herb is recommended for more vaporization. Once the herbs are loaded, one can be ready to enjoy vaporizing.

The Final Step:
Its time to Vaporize!
In view of the proper vaporization, this is the most important step. First of all the user should wait for the vaporizer to turn hot. Some vaporizers use a metal heating element. In the case these vaporizers, the element will turn red. Whichever vaporizer, the user uses; it is required to be hot sufficiently so that it can be used within five minutes or ten minutes. Once it is sufficiently hot, then up to the end of the heating element, the hand piece should be held, and thereafter the mouthpiece should be taken into mouth. Now air can be drawn over the element that heats it which, in turn, then heats the herbs as it passes over them. Thereafter, hot air should be drawn over the herbs, which then, in turn, will create the vapor to be inhaled. This is how one can have proper vaporization.