With the economy the way it is today, buying a used atv just makes more sense than buying a new one. Just be aware that there are certain things that a person looking for a used atv needs to be on the watch for.



The easy to follow tips below will help a new atv buyer or a seasoned buyer choose a used atv that will provide them with fun fourwheeling for a long time. Just be patient and look over the machine real well. Ask questions and take the machine for a spin.

As you walk up to the atv, take a good look at the tires. These can tell you whether or not the owner has been abusing the machine or not. Tires full of plugs or worn tread indicate its time to buy new tires.

Always take a friend with you when going to look at an used atv. Raise the ATV up if possible to check the underside. Make sure to look at all the shock points and check for any rust or damaged areas. This includes cracks in the frame. Look for signs of fresh paint.This may mean a recent repair.

If you're buying a used 4x4 atv, check out the cv joint boots. If they are cracked, this can allow water to get inside. This will cause rust and lead to major damage, which leads to major repair cost!

While you down there, check the oil in both differentials. Does it look milky or chocolate colored? This is a sign of water. You can also use this rule of thumb for the engine oil.

Be sure to look at the sprocket or sprockets. If the sprockets are worn on one side or bent, it's likely time for a new chain and sprocket.

Spindle damage can be the result of worn wheel bearings. To check this, support the front end on jack stands and move the wheel in and out and side to side checking for excessive play. Once you've checked the front, do the back the same way.

To check for worn tie rod ends, try and move the handle bars back and forth. There should be little to no play.

The air box is one place many used atv buyers fail to check. You can find it beneath the seat by removing it. Dirt or water inside the air box is bad news.

Don't forget to check for rust in the gas tank. You check for this by taking a flashlight and shining it into the tank. Rust can decrease the life of your engine dramatically.

Make sure you test the lights and accessorie jack. Be sure to look for corroded connections around the battery and any previously repaired electrical wiring.

Don't forget to take the machine out for a spin. See how the atv handles. Are there any loose parts? Is it hard to start? Does it accelerate properly? Try braking hard a few times to test the brakes.

Does the exhaust have the spark arrestor in place? Many owners remove these. However, National Forest and other public trails require spark arrestor's to be in place. Owners without them can be fined and prevented from riding in these places.

Follow these 12 tips and you'll increase your chances of purchasing a quality used atv that will give you many years of service. They're not hard to follow. You just need to remain focused and don't like the Seller pressure you into hurrying up or skipping a few of the checks.