Buying a swimming pool can be quite a difficult decision indeed, especially when you are trying to decide between an in ground pool or an above ground pool. Each one has something to offer you and your family, although there are also differences, which you should know before you make that final decision.
The shape with your pools is important. In ground pools come in oval, kidney, and square shapes. Above ground pools on the other hand are only available in round or oval If you have a large family or a lot of friends who like to swim, you'll want to get a shape that can support a lot of swimming.
Size is also important, especially for families. Above ground pools are much smaller than in ground pools. Pools that are in the ground are a lot bigger, and offer you several different sizes to choose from. They cost a lot more than above ground pools though. Above ground swimming pools use less water, although they will also limit what you can do in your pool.
If you like to dive, you'll have to get an in ground pool. Above ground pools can't have diving boards, as most are only 6 foot deep. This isn't a good diving height, which is why you won't be able to dive with an above ground pool.
Buying an above ground pool will save you a ton of money. The money that you save, can be used to add to your pool area, such as a deck or privacy fence around your pool. If you choose to buy an in ground pool, you'll spend a lot of money. You won't need a deck though, as they are easily accessible. If you add a privacy fence to your in ground pool, it won't have to be near as high as it would with an above ground pool.
Installation is also a consideration with your pool. You can normally install above ground swimming pools by yourself with little to no help, in a few hours. In ground pools on the other hand, take several days to install and they must be done by a professional. This can get costly as well, racking up a hefty bill before you realize it.
Making that final choice really comes down to what you hope to get from your pool. If you need a lot of space or want to swim laps, an in ground pool is your best choice. If you need a smaller pool for yourself or your kids, an above ground pool would suffice. The choice is entirely up you though, and what works best for you. If you are on a budget or don't have a lot of money to spend - you would be better off going with an above ground swimming pool.
How To Maintain A Swimming Pool
But when you go to take that refreshing dip in your pool, you end up basting in 25,000 gallons of braising liquid.
Do you try to cool the pool or use it as a crock pot?
Let's try cooling it off first with these four suggestions that varying widely by price and practicality.
A Pool Heat Pump
Yes, it is possible to cool your pool with a heat pump. The Aqua Cal Heat Wave H155 can cool as well as heat your pool with the flick of a switch. The cooling side of the heat pump operates at 83,000 btu's.
At that rate of cooling, it takes approximately 19 hours to cool a 25,000 gallon pool 10 degrees. This is quick cooling by any standard, and 10 degrees can be the difference between cool and cook. If your pool heat pump needs replacing, this unit is worthy of your consideration.
Solar Pool Heaters Can Cool The Pool Too
During the hottest part of the summer, running the solar system at night can cool a pool to a more refreshing swimming temperature - down several degrees in one night if the conditions are right. Also, if your pool is too warm, leave the solar blanket off at night to allow more heat to escape.
Ice is Nice
You can cool your pool with ice if you add enough of it. Cubed ice cools quicker than blocks but either way you're going to need tons of it. One of the contributors to the Myth Buster's forum calculated it would take 5,600 pounds of ice to cool a 25,000 gallon pool 5 degrees.
Depending on the size of your vehicle and the condition of your back, you could easily collect 560 – 10 pound bags of ice with only 6 or 7 trips to the supermarket.
The Pool Cooler
This simple and ingenious device uses evaporation to lower the temperature of your pool. The main component is a three foot long, 1 ½ inch diameter plastic pipe with multiple holes drilled vertically into the upper half of the pipe. Water is diverted through the holes and creates a misting effect that produces evaporative cooling.
According to the manufacturer, “After the initial installation of the adapter to the water return line (less than 2 minutes), The Pool Cooler connects and is fully functional in less than 30 seconds”.
Over the course of a week, this nifty device will reduce the temperature of a 30,000 gallon pool by 5 degrees when the air temperature is 94 – 99 degrees. At $29.95, you could probably afford to install more than one.
If you live in the Northeast, like I do, cooling the pool is one item you'll never have to worry about showing up on your “to do” list.
Both Jerald Shapiro & Sam Streubel are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.
Best Electrical Engineering Universities They are the best in repair, upgrade, install and maintain electrical system, equipment and wiring. Minneapolis Electricians are available 247 to you giving 100 to the customers