Saddle bag with cracks on it are not pleasing to the eyes. In addition, it contributes to the overall unattractiveness of the bike.



How do I do repairs? Actually, a friend taught me how to. First, for cracks, you can use tape on the inside and pressurize thick glue with a piece of flexible plastic into the crack. You need not use sand paper because the glue and plastic will be almost unseen. For best results, you can use plastic pipe glue that can be found in the plumbing section. This glue dries up even without heat application.

ABS shavings can also be used to repair saddle bags. It dissolves effortlessly into the liquid within five to ten minutes. If you want a richer mixture, add more shavings. Mix it properly. To make the surroundings of the crack rough, use some 220 grit sand paper. When it is already rough, apply the mixture over and into the repair area. In order not to seep out or at least minimize the chance, begin from the inside of the bag and place some foil on the other side. You can clean messy edges with wet or dry sandpaper. Make sure that ventilation is good. If you can have a fan blowing away from you - the better. It helps in achieving easy and mess-free repairs.

Other miracle products are the liquid plastic by melting ABS in a solvent, thick black plastic that repairs without the application of heat and black ABS Cement. Repairing can be that easy even without heat!

I have repaired saddle bags before - some having cracks and some are far worse. My tools are the tape, plastic pipe glue, shavings and the likes. They can make miracles. Fiberglass is also a solution. Nonetheless, it is hard to have permanent bonding to the plastic since it is slippery. However, you can try them too.