There are many benefits your home can gain when you remodel your porch. This great example provided by DoItYourself.com provides great tips to enhance your outdoors with fresh ideas that employ the usage of carpentry skills, paint and stain to bring in life into a regular backyard. Plenty of mosquitoes along with the need to enjoy summer,spring and fall by lazing around outside, made the homeowners of a residence in Atlanta in Georgia to alter their backside porch from a plain looking slab of concrete to a showcase that was screened in. While taking the decision took no time, the actual solution was tedious.



The owners realized that screening the back patio was absolutely needed. It was just a squarish piece of concrete which was placed under an overhanging roof. This made the situation far more complicated. They needed to blend the porch along with the house while also providing a shield from local insects, summer heat and humidity levels. The slab of concrete even had a slope to provide for rain water to go away and so this needed to be trimmed from the frame's inside to fit into the slope.

Here's a stepwise guide of what these people did:

1. Cutting the paneling: Sheets of paneling of the beadboard ceilign variety were cut into 4x8 feet dimensions. These were primed beforehand.

2. Installation of ceiling fans and panels: With the help of a nail gun the owners were able to quickly install the ceiling panels. It was so much easier that hammer swinging and holding on to the panel! Before the panel was installed fan and light wiring was performed on the ceiling. The fan made it possible to make the porch around 8-10 degrees colder as compared to outdoor temperatures. The light made it possible for the usage of the porch during night time. So while one person would hold the fan another person would connect the wiring and then screw the fan in place. The finish trim on the ceiling served to camouflage the panel seams.

3. Framing of the porch: Based on the standard sized screens that were installed, the porch frame which measured 2x4 feet was fitted to size. Crosspieces could be directly nailed on to the vertically placed braces or just toenailed into the area.

4. Interior panel attachment: With the help of a staple gun the beadboard paneling comprising pine along with plywood, was secured into the interior. Although level on the topside, the panels needed trimming on the bottom portion in order to fit into the unevenly surfaced concrete flooring. This used to have a slope to provide rain runoff.

5. Levelling and attaching the exterior panel: All the hardboard panels of the exterior were put into place one by one, right from the bottom to the top. The first panel was customized and cut as per the uneven base line of the ground. The usage of a weather resistant type of paint made it possible to maintain exteriors by just using water and soap for color maintenance.

6. Finishing with the screen: All the vinyl grids were directly screwed upon the wood frame. The screens were placed on the channels present on these grids, thus facilitating a stapleless installation of aluminum and fibreglass screens. Upon rolling these screens with a spline on the grid channels, the extra screen was just trimmed off.