Mold and mildew are tremendous health hazards. At the very least, they can cause fungus infection and skin allergies when they come in contact with the skin and eye irritation when they get into the eyes. However, mold and mildew can cause more serious and chronic ailments, such as allergic rhinitis, asthma and lung infection, especially when there is gradual exposure over time. That is why it is very important to kill mold and mildew as soon as signs of them appear in the house.
There are many ways to kill mold and mildew. Some ways involve using household chemicals such as disinfectants and cleansers that are formulated to kill mold and mildew. These household chemicals need to be used with care, as getting in contact with the mold and the mildew is harmful in itself, and getting in direct contact with these household chemicals can burn the skin too.
Another proven method used to kill mold and mildew are ozone generators. Ozone generators use what is called “high ozone shock treatment" to deal with mold contamination.
Ozone generators produce ozone by converting oxygen into ozone with high voltage, much like lightning in the sky. Ozone has the ability to oxidize mold, thereby disabling its capacity to reproduce and eventually killing it. High concentrations of ozone are necessary to effectively decontaminate mold and mildew infestation.
But to optimize the effectiveness of ozone generators, it is important that the problems concerning the water seepage, the humidity and the lack of ventilation in the area to be contaminated be first addressed. Ozone generators work best in dry places. Also, the area to be decontaminated must be evacuated because ozone is also toxic to humans, plants and pets. After the treatment is done, suffient time should be allowed so the ozone can turn back into oxygen before the area is reoccupied. Usually an hour or two is sufficient.
The concentration of the ozone to be produced by ozone generators depends on the size and the degree of contamination in the affected area. Naturally, if the room is large and the contamination is high, it is necessary for the concentration of the ozone to be high as well. High quantities of ozone are needed to shock the mold and mildew; if the ozone is too weak, the decontamination will fail.
After the decontamination with the ozone generator is done, the dead mold should be removed completely and all contaminated building materials and furnishings that cannot be cleaned should be disposed of. Doing this will prevent the mold and mildew contamination from recurring and from further endangering the health of the people staying in the affected area.
Ozone generators are effective tools used to kill mold and mildew. To maximize their effectiveness, they should be used carefully and correctly.
Kill Mold And Mildew
Mold spores are the basic units of life of molds and mildews. They float around and wait for the right condition of life. They prefer to grow on dead organic products since they collect their nutrition from these materials. Soil and dust that contain organic particles are very much prone to mold infection.
However, most important factor for mold spores to settle down is moisture. They prefer humid and warm weather over dry and cold places. Incidents of mold infestation are high in humid areas than semiarid and cold places. Mold spores become extremely active after rainfall and during fall. And chances of mold attack double after flood.
What are mold spores?
Molds reproduce by sporulation. Mold spores are very small in size and are ubiquitous; they are present everywhere.
Being so small, they can easily penetrate through strict filtration systems. They can travel through respiratory tract of human beings to reach lungs. Exposure to molds spores often lead to respiratory diseases, breathing trouble and asthma attacks.
Some RANDOM FACTS about Mold Spores:
They are smaller than pollen grains. Hence, people who are not allergic to pollens may suffer from allergic reactions when exposed to mold spores.
Inhaling mold spores may commonly lead to asthma attacks, difficulty breathing and respiratory infection.
Quantity of mold spores in per unit volume of air is commonly called as mold spore count.
Mold spore count is high near golf courses, lakes, farm land and wet and humid areas. Spore count subtly increases after heavy rainfall.
High spore count increases the chances of mold infection in human beings. Inhalation of higher amount of mold spore cause different types of ailments.
Mold spores are carried by air current or other particles including human skin. They settle down as soon as they get the moist environment. Once spores get the ground, mold colonies are formed. As a result spore count increases in the surrounding areas.
Why you need to kill mold spores?
They are harmful. Mold spores are not only allergens; they are responsible for bigger mold growth. Single mold spore can make your house a nest of molds and mildews within few weeks.
Exposure to hyphal fragments and mold spores can lead to various physical problems. Common symptoms are: watery and red eyes, runny or stuffy noses, chest congestion, breathing trouble and wheezing, skin rash, coughing and sneezing, respiratory trouble, headache, hay fever and sickness. Condition might worsen for immunocompromised persons. To avoid exposure to molds, you need to kill mold spores, the basic unit of life of fungus, and keep your home safe for the members.
How to kill mold spores:
Mold spores are airborne particles and can only become active once they get the conditions of life. They are harmless otherwise, if not inhaled. To kill mold spores, you need to kill the closest mold colony.
If you find spore count is high inside your home, chances are molds have already penetrated in. Use organic mold cleaning products to remove mildews, black molds and fungus.
Some people suggest using ozone blasting technique to kill mold spores and molds. There are controversies about the effectiveness of ozone shock treatment or ozone blasting. The process can be health hazardous for human beings as well. On the other hand, organic cleaners do not have any side effect and kill mold completely.
Both Kenneth Brumleve & Markus Skupeika are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.
Kenneth Brumleve has sinced written about articles on various topics from Debts Loans, Home Improvement and Home Management. are your best solution for the , mildew and. Kenneth Brumleve's top article generates over 4400 views. to your Favourites.
Markus Skupeika has sinced written about articles on various topics from Computers and The Internet, Wrinkles and Car Accidents. Are you fighting an endless battle trying to defeat ? Proper. Markus Skupeika's top article generates over 60500 views. to your Favourites.
Cocktail Dresses And Gowns And for one of the number one tips regarding cocktail dresses do not try to fit into a dress that is cut too low or is too tight the results could be disastrous