Nobody wants to have to remove the mold from their home, but if you live in an older house, then you may have to go through this eventually. Even newly built homes can have mold growing in them in certain areas if bad techniques were used or just poor quality materials. As long as the building codes in your area were followed by the contractor of your new house, there is nothing that you can do, even if the poor quality materials are the reason that mold exists.

If the job was done"by the book's", then you cannot obtain any legal compensation. When having a home built for you, make sure you know that the contractor you hired to do it will do the job with good quality building materials and get references before even letting them start.

But, what do you do if you already have mold in the house? Well, you can probably clean up a lot of it yourself if you have a smaller mold problem. If you have experience in interior remodeling work, then you can tackle even a larger scale mold removal project on your own. Your insurance may even cover it, if it is due to another kind of damage that your homeowner's insurance covers, like water leaks.

There is a certain amount of equipment that you will need if you are going to do this job on your own, though. Having a respirator is something that you will really need, especially if you are going to open up any walls. You can get a basic respirator from a hardware store, but if you are going to open up any walls, you will probably want a respirator that has a HEPA filter attached to it.

You will also want a few heavy duty trash bags to toss the debris in.

As far as some protective equipment that you can wear, heavy duty rubber gloves might also be helpful depending on what you are handling. If you are just scrubbing floors or walls, then you could probably get away with some lighter latex gloves. Some plastic disposable coveralls and covers for your shoes will help keep mold spores from getting on your clothes. Safety glasses might also be necessary.

As with your respirator, the cleanup job after all the debris is gone should be done with a vacuum that has a HEPA filter on it. This will release clean, filtered air back into your home instead of releasing the dust and mold spores like a normal vacuum would.