"We should implement Lean Production and TPM in our plant", he says. "This will make our production more reliable and increase our delivery accuracy".



The MD is paying attention but is not yet convinced. He wants to put the ideas to a test.

"Looks interesting", he says, "Please come back with a good calculation of the Return on Investment so that we can see if it fits into next year's budget."

This is where the story might end. How could you possible estimate costs and benefits from such advanced management techniques as TPM and Lean Production? These concepts are known to be difficult to plan in advance, and they require a mind-shift for everybody in the facility.

Well, it may be difficult but you have to do the calculation anyway. Arguments as "we have to do this" or "everybody else is doing it" are just not convincing enough.

A change project must be looked upon as an investment that will come with initial costs and hopefully bring something back in return. This is no different from any other investments. If you can not give an educated guess on its financial impact, there is a big risk that the project might not be given the necessary resources for what it needs to succeed. Even if the financial impact of important factors such as shorter lead times and better delivery accuracy are not known, we need to describe how this project will raise profits in the company.

To give an answer to these important questions we have put together some simple guidelines for you to use, and if you prefer, a free calculation tool that you may use to do your own estimations.

What will the costs be?

The main cost will consist of:

Training and Consultancy

No successful implementation of TPM and Lean Production has succeeded without the help of experienced professionals. You will have to train your employees and you need support in your project team. A good estimation is a yearly cost of $100.000 per 100 employees involved

Increased initial maintenance costs

Elimination of manufacturing wastes and implementation of improvement ideas are likely to increase the maintenance costs. Expect maintenance to increase up to 20% the first year, but with it stabilizing at a level less than today after one to two years

Project team members

You will need people to run the project. Project management and coaching equals to about one full-time coordinator per 100 employees in the facility

Benefits

Increased Overall Equipment Efficiency (OEE) is the main factor that may be used to approximate the return on the efforts. Simply speaking, the OEE is the ratio of the facility's actual output compared to the theoretical output that would be possible if the machinery was run at full speed every minute, without break-downs, lack of raw material, quality losses or set-ups. As the OEE-ratio is a direct reflection of your plant's capacity, it may be used to calculate the future productivity after improvements.

An example: A plant produces 10,000 units per year with an OEE-ratio of 50 percent. After improvement, the project team estimates that it will be possible to reach an OEE-ratio of 80 percent. This means that they will be capable to produce

10,000*80/50 = 16000

units in the same facility without investments and with the same manning as before.

Can the increased capacity be used to increase sales?

One important question is if there is a market for expansion. If so, the increased capacity may be used for increased sales. It is common that the company's market share might grow after implementing TPM or Lean Production. This is possible as improved delivery accuracy and shorter lead times make more sales possible even if the market is stagnant.

If expansion is not considered possible, the increased capacity may instead be used to lower the production costs. This is possible through

- less overtime

- fewer shifts

- fewer parallel production lines maintained and operated

The direct labor costs for production will therefore decrease as the OEE-ratio increases.

Your present and future OEE-ratio

Do you know your plant's present OEE-ratio? If so, is it accurately calculated? Often we see that some downtimes are deducted when OEE is calculated. This might be stops for planned maintenance, set-up times, and lack of personnel. The end result will be an OEE-ratio that looks better than reality.

If you do not know your present OEE-ratio, the easiest way to determine it is to use the free OEE - calculator at http://wcm.nu

Then estimate what you consider a possible OEE-ratio after improvements. World Class companies reach 80-95% OEE, what is a realistic level for you?

Use the present and future OEE to calculate the future benefits. If you don't want to do the calculations by hand, try instead the free TPM and Lean - calculator at http://wcm.nu

Et voilà! You have your Return on Investment calculation to present to your stake-holders!