Heavy Duty Sewing Machines Video

Similar Videos

Currently No Video Available

Overview:

Most spiral coil binding machines are designed to punch sheets of standard bond papers and up to a few plastic covers at a time. However, even the strongest models have a difficult time punching through chipboard and other thick materials.

With this in mind, DFG (Document Finishing Group) developed the TitanCoil Ultra. It is equipped with a stronger punching mechanism that makes it ideal for use in punching hard board covers.

This opens up a whole new world of opportunities for quick printers, copy shops, print on demand operations and large corporations.

Suddenly, the concept of producing your own coil bound hard cover documents can be a reality.

Strengths / Features:

At first glance, the TitanCoil-Ultra looks a whole lot like the regular TitanCoil binding machine. It uses the same heavy duty metal construction and even has the same shell. In fact, if it didn't say Ultra on the machine, it would be impossible to tell the two apart by looking at them. Both machines utilize heavy duty metal components and are extremely durable.

Although the punching capacity of the TitanCoil Ultra is only three sheets higher than the capacity of other DFG Titan machines, it includes a larger punching throat. This larger throat is designed to allow users to insert a piece of chipboard or a custom made hard cover into the throat of the document. This is important since most coil binding machines don't have a large enough throat to fit a piece of chipboard inside.

This machine includes fully disengageable dies. This means that it can be set up to bind almost any size of hard cover document. It can punch any size sheet up to eleven inches in a single pass or you can use the open throat design to punch longer sheet sizes using a two step process. This means you can use the TitanCoil-Ultra to punch and bind documents as short as two inches and as long as twenty inches.

Although the Titan-Coil Ultra is designed specifically for users who need to bind hard covered documents, it is also an excellent machine for binding regular reports, presentations and proposals with coil. It includes a coil sizing guide that helps you select the correct diameter of coil for your books. It also includes an adjustable depth of punch margin control and a foot pedal operated spiral coil inserter on the top of the machine. These features make this a great machine for binding both soft covered and hard covered documents.

Weaknesses / Limitations:

Although this machine includes a larger punching throat and can accept thicker materials such as chip board, it can be extremely difficult to pull the handle if you load too much paper into the throat of the machine. Most individuals will have a hard time punching more than fifteen to twenty sheets of paper or two or three clear plastic covers at a time. Depending on the thickness and density of the chipboard that you need to punch, this machine may handle it easily or may require a great of force. If it is too hard to pull the handle on the machine it is a good idea to reduce the thickness of the material that you are punching so that you don't damage your equipment.

The TitanCoilUltra includes a foot pedal operated coil inserter that is located on the top of the machine. However, the design of this inserter and the quality of the foot pedal are less than ideal. The coil inserter uses a single roller design (as opposed to two rollers) and is only about six inches in length. This shorter length and single roller design make the inserter less effective for use with larger coils or for high speed inserting. The foot pedal is also not nearly as strong and durable as the foot pedals on other similar pieces of binding equipment.

The chip tray or waste drawer is also fairly small on this machine considering the punching capacity that it offers. It is important to remember to empty the chip tray on a regular basis. If the chip tray becomes full it may become difficult to punch items.

Recommendation:

Apart from a heavy duty modular binding punch which costs thousands of dollars, this machine is one of the only options available for organizations looking to punch hard covers for use with coil binding.

It includes a larger than normal punching throat and a great set of features that make it an excellent spiral coil binding machine for handling both hard covers and soft covers.

Although the design of the spiral coil inserter is not optimal, this machine is still an excellent choice for companies that might need to punch chipboard or thick materials.

However, it is important to remember that if the handle is too hard to pull, you are probably punching an item that is either too dense or too thick.

Next Paragraph..

A Guide to Business

Video on Heavy Duty Sewing Machines