The saws of table of Cabinet are heavy (by using great quantities of cast iron and steel) to the minimum to reduce the exactitude of vibration and increase. A saw of box is characterized by having a closed bottom (of box). The saws of Cabinet have usually engines with induction in the 3 to the 5 kilowatt that HP (2 to 4) extends. For the use at the house, this type of engine requires typically that a resistant circuit be installed (in the USA, this requires an exit 220V). The engine is included in the box and leads the blade with three v-belts parallel.

The saws of Cabinet are heavier and offer the following advantages compared to the saws of contractor: a heavier construction for the lower vibration and increased longevity; an box-assembled pivot (the mechanism which incorporates the frame of web and takes account of the adjustment of size and slope); de-dusting improved due to the box completely included and common incorporation of a port of de-dusting. It is easier to adjust the generally box-assembled pivots than the table-assembled pivots. The American saws of box of model differ in the design from the European saws from box from model. The American saws of model generally follow the model of the Unisaw delta, a design which evolved/moved since 1939. Saws of this general type are manufactured in the United States, Canada and in China.

These saws are characterized by a cast iron top on an integral basis out of steel, place in the section, with the corners with rays. Two 3/8" deeply by 3/4" broad slits of mitres are parallel localized with the blade, one with the left of the blade and worms the line. The type common of barrier of tear gone up to this type of saw is characterized by the standard model made by Biesemeyer. This very vigorous T-type and out of steel barrier goes up to a steel rail in front of the saw. It has the replaceable laminate faces. American saws of box are normally designed to accept one 13/16" blade of broad piled up dado in addition to one standard web. The most common size of the capacity of blade is 10"of diameter.

The axis of blade has a diameter of 5/8". The American saws normally include a device of anti-by-effect which incorporates a divider, toothed pawls of anti-by-effect and a clear cover in figure of blade. The American saws of model have an easily replaceable insertion around the blade in the top of table. This allows the use of insertions of zero-release, which reduce considerably the tear out on the bottom of the object. It is common for this type of saw to equip with a prolongation of table which increases to tear the capacity for goods of sheet.