Digital cameras have many advantages, but they also have some disadvantages and reaction time is one of them. There are three response times, you should be interested in: the delay between pressing the shutter button and a photo shoot, the delay between switching on the camera and a photo shoot and the delay between shots a photo shoot and a subsequent one. This article explains the reasons for these delays and suggests ways to overcome it.

There are three response times or delays, which are important to understand and to be aware when taking photos. Here is the list of causes and ideas on how to deal with them effectively:

tripping: There is a noticeable delay between pressing the shutter and taking a picture. When you press the shutter of the camera through a series of setup processes to make all its electronics ready. Only when this is done editing the camera can capture a photo. Some cameras will also be a focus on process, when the shutter button is held, and takes just a photo, if they are completed. The delay time varies from camera to camera, but is usually less than one second. If you film cameras, before you are probably not used to this delay, which does not exist with most film cameras.

Although less than a second sounds very short delay can be considerable when shooting photos of moving objects such as sporting events. There are a few photo-shooting practices, which can help in avoiding delays "results. One way to shutter lag is to hold the shutter halfway, when photos of moving objects. This method can work If the object in more or less a fixed distance from the camera or in infinite focus. Hold down the shutter halfway to focus the forces and locks the camera to do some setup work processing. When you are ready to Your photo press the shutter button down - the result is a significantly shorter period than most of the processing and the focus of work has already been done. Another way to avoid tripping is that the automatic focusing process, in usually begins when the shutter button is pressed. One way to do this, hold the shutter button halfway down. In most cameras the result will be a time a priority process and then af

focus lock. The camera remains in focus, and if you press the shutter button fully pressed down, it will take a photo without re-focusing. Another possibility is to the camera in manual focus.

Subsequent delay photo: This is the delay between taking one photo and when the camera is ready to take a later one. With film cameras, this delay was very short, since it only to the camera rolling the film to the next fresh negative. With digital cameras, there are processing and financial management that needs to be done after each photo is taken. For example, the camera to a computer process, which compresses the photo (turns the raw pixels in a compressed JPEG file), then it has to store the photos on its memory card (storing files on flash-based memory cards is a slow process due to memory technologies used). Another possibility is to use the camera burst mode (if the camera supports). In burst mode, the camera shoots a rapid series of photographs as long as the shutter button is held or until the camera memory is full. In this mode, the camera writes the images into a temporary memory, which is very fast but small. When the shutter button is released or the memory is