A properly laid fibreglass roof also known as GRP Roofing, will last for at least 20 years with no measurable deterioration. The roof must be laid onto a dry deck in dry conditions at a temperature not below 5'C. The resins and top coats should be suitable for use in GRP Roofing. This guide relates only to the application of the GRP laminate and top coat. The deck should be of 18 mm exterior plywood or Sterling Board and be well fixed to the underlying joists. Typically two men can strip, re-deck, laminate and top coat a roof of about 20 square metres in one day. Always try to plan starting the roof when a settled period of weather is forecast. The deck may be a new deck, or may be formed over an existing roof. You should ensure that the new deck is laid to adequate falls in order to allow good drainage, so that there is no standing water on the roof after completion.



We are the manufacturers of GRP moulded components for last 2 years and are registered vendors for almost all the major Industrial/Govt. We undertake total job from designing, developing and supplying GRP moulded components and specialize in mould making for the automobile, packaging and construction industries.

Our GRP fiberglass sheets weatherproof Permanent System is a layer of GRP (fibreglass) laid to a prepared deck (roof) to form a waterproof flat roof layer that will last a lifetime. The Fibreglass layer is formed directly onto a new or existing deck and bonds to the decking boards to form a fully bonded waterproof flat roof. The main laminate may be applied before or after the bandage has cured. The laminating must be planned depending on the air temperature. Long runs may be attempted in cooler conditions while short runs must be used in hotter conditions.

We are one of the leading manufacturers of GRP fibreglass sheets and offer a large variety of sheets, which match all the profiles of Asbestos, precoated GI and aluminium sheets. The range of thickness, colours, sizes and roofing accessories we offer is unique and envied by other GRP manufacturers.

Architectural Fibreglass Moudling Ltd offers a range of GRP fibreglass roofs that are an effective preventative measure against leaky flat roofs for the long term. Our range of GRP fibreglass sheets are the most cost effective means of looking after your property, as the durability of the product will off set the cost over time. In choosing a GRP roof, you are choosing to invest in a product that has, since its creation, been used in many applications.

The GRP roof can also be applied in the new build process. Since the application of our GRP fibreglass sheet is a cold application, there are no risks during or after the installation of this system and you will be able to enjoy the benefits of your seamless roof system as soon as our fitters leave.

Compared to traditional roofing materials (felt and bitumen based products) fibreglass materials are more expensive although this additional cost is offset by hugely increased life expectancy. In many cases GRP is a cheaper alternative to traditional materials due to faster installation and the reduced need to strip out existing materials, roof sheets or glazing bars etc.

There are so many benefits to choosing GRP fibreglass sheets over other security glazing products such as wired glass. For a start choosing GRP sheets ensures that your building or wall has security & anti-vandal glazing that can withstand even wilful violence. The GRP glazing sheets product range has been tested to the highest levels of impact and now to prove its durability.

We have hi-tech manufacturing unit backed by dedicated and knowledgeable manpower, which is the main reason behind our success. The company has lived up to its reputation of being the most reliable company in its sphere of operations. Ever since our inception, we have always emphasized on high standard of quality and keen precision of GRP products. Using latest technology and superior grade raw materials, we are manufacturing roofing sheets. We give top priority to quality and use qualitative raw material in the production of our range. Further, our products also undergo stringent quality checks at each and every stage of production process.

These GRP fibreglass sheets have strength and the durability to out last Steel, PVC or Fibre Roofing materials. More commonly used as roof lights to allow obscured light into buildings. These sheets are avaliable in Class 3, Class 1 grade is avaliable to order. G.R.P. Glass Reinforced Plastic (Fibreglass) a composition of resin and chopped strand matting.

At fibreglassmouldings.co.uk we work closely with our clients on all new projects, this is something that the company really enjoys, fibreglassmouldings.co.uk bring a wealth of manufacturing and composite experience to almost any project, our commitment to technical.

Once you have chosen which GRP sheet product is best for your structure you can rest assured that you have protection from vandalism and thus further maintenance. If you are unsure which glazing product is best suited to your building contact our customer care team for further advice today.