Magnetic layer is applied on the conventional magnetic tape's base film. Maxell has devised a new coating mechanism in which the base film of LTO ultrium is coated with 2 layers instead of a single layer in traditional magnetic tapes. The main purpose of adding two coating layers in Maxell ultrium LTO tape is to upgrade its durability. This innovative coating mechanism of Maxell enables the production of LTO tape cartridges having 50nm tape thickness. The tape thickness of Maxell LTO data tapes is less than 50% in comparison to the conventional tapes. Magnetic particles and the tape thickness elevate the output and recording performance of Maxell LTO tapes.

High density recording requires thinner magnetic layer and smooth tape surface, so that self demagnetization and recording loss can be prohibited. Strength of signals is improved by thin magnetic-layer that leads to higher output. Smooth tape surface of Maxell LTO tape offers greater magnetism. The under layer of Maxell LTO tape reel comprises of very small particles that make the tape surface even smoother. Signal dropout & modulation noise in Maxell LTO technology are reduced due to the smooth base film.

High reading & writing speeds require strong base film. Exceptional strength of the Maxell 183950 WORM LTO-3 tape reduces the modulation noise with improved ratio of signal to noise. The strength of Maxell LTO3 tape 183950 cartridge assists in controlling the contraction and expansion at extreme temperatures. Slitting technology used by Maxell generates razor sharp tape edges of LTO ultrium tapes.

Smooth tape surface results in greater co-efficient of friction. Maxell solves this problem by using smooth and highly durable back coating process that helps the LTO ultrium tape in achieving ideal friction amount. Back-coating process eliminates errors and dropouts that are caused by dust.

Pressure rollers press the tape in order to make tape surface extremely smooth. This process is called as ?Calendaring?. This mechanism reduces spacing loss and provides exceptional carrier to noise features. Uneven layer of magnetic particles create spaces between head and tape reel that can result in spacing loss. Advance calendaring technique by Maxell uses pressure-roll mechanism which optimizes the values of pressure & temperature to the magnetic layer's requirements, thus creating a remarkable smooth surface. So the tape surface of Maxell LTO3 tape reel is 30 percent more even when compared to conventional data tapes and thus generates powerful signal transmissions along with increased ratio of carrier-to-noise.

Tape length of high capacity data tapes is more than 0.5 mile. It is necessary that the tape reel width should remain constant as the reel moves back & forth through the drive. In this way the tracking error can be prevented. Maxell 183950 LTO3 tape's Neo-SMART technology assures that the tape width with the help of tape slitting process is maintained to a few nano-meters along the whole tape length. If the tape edges are poorly cut, then it can result in deterioration of magnetic layer due to peeling, thus causing errors in data. Slitting technology used by Maxell generates razor sharp tape edges of LTO ultrium tapes. The sharp edges of Maxell LTO 3 cartridge minimizes the chances of deterioration and elevates the tracking of tape transport.

Visit tape4backup and avail the special offers on Maxell 183906 LTO4, Sony LTO1 ultrium LTX100G, IBM 95P4436 WORM LTO-4 tape, TDK D2406-LTO3-LBL LTO 3 tape and other tapes as well.