Why does the U.S. Gear D-Celerator not bolt to the back of the turbocharger like other brands?

All exhaust brakes are designed to enhance the driving experience by giving the operator the added security of braking assistance. The difference is in how the unit is engineered. Will the exhaust brake interfere with the operation of the vehicle's other systems? The turbo-mounted exhaust brakes offered restrict exhaust flow by 25%. This is because the stock pipe (or casting) they remove behind the turbo is empty, but the replacement exhaust brake casting has parts in it.First, lets look at how much power the turbo compressor is using.

What is a turbocharger?

A turbocharger is really a mechanical device that is designed to pressurize air. We most commonly think of a turbocharger being applied to automotive use, so that is how we will describe it, but there are other uses for turbos that vary slightly in design. Think of a turbo as two fans that are connected to each other by a shaft. Exhaust gases coming out of the engine drive one fan, called a turbine wheel.Answer: The e-Ram is a distant cousin of the full blown turbo or supercharging system which employs a centrifugal impeller that must run all the time.

What is a "silencer ring"?

A silencer ring is a metal baffle placed into the turbocharger inlet to reduce whistle from the turbocharger. It is installed in Ram truck engines at the request of Chrysler. The silencer ring has no effect on engine output, EGT, or boost levels. Removal: Remove the flex hose from the front of the turbo that goes to the breather.A silencer ring is a metal baffle placed into the turbocharger inlet to reduce whistle from the turbocharger. It is installed in Ram truck engines at the request of Chrysler. The silencer ring has no effect on engine output, EGT, or boost levels.

What is the difference between a Paxton Supercharger and a Turbocharger?

Turbochargers are powered by exhaust pressure while superchargers are driven from the engine crank pulley. Superchargers allow you to attain boost and horsepower on demand. A turbocharger requires the exhaust pressure to build resulting in a "lag" in horsepower increase. A turbocharger will typically have a higher discharge temperature than a centrifugal supercharger. This higher temperature is a result of the turbo impeller spinning faster and the heat generated from the exhaust gas.Answer: The e-Ram is a distant cousin of the full blown turbo or supercharging system which employs a centrifugal impeller that must run all the time.

How does a Magna Charger supercharger compare with a turbocharger?

All forced induction devices increase air pressure and density in the intake manifold by pumping more air than the engine would use without it. This concentrated charge of air results in a more powerful combustion stroke in the engine's cylinders, resulting in improved performance over naturally aspirated vehicles. A supercharger is connected directly to the crankshaft by a belt; unlike a turbocharger, which is driven by exhaust gases.There will be a turbocharged version available from B2 Engines. Remember, much more has to be considered than just bolting on a turbo--lowering the compression ratio, turbo cooling, manifold interface, induction, etc.Every month I hold a Keyword Clinic teleseminar. It's usually on the third or fourth Tuesday of the month.

What is a "silencer ring"?

A silencer ring is a metal baffle placed into the turbocharger inlet to reduce whistle from the turbocharger. It is installed in Ram truck engines at the request of Chrysler. The silencer ring has no effect on engine output, EGT, or boost levels. Removal: Remove the flex hose from the front of the turbo that goes to the breather.