Take a Chance on Yourself or Hire a Professional?

Remember one thing refacing a kitchen is a hard job and a huge project. You will need to have the right help and a good set of skills to do this type of work. This is not a job that you should rush into. You need to take your time and make it perfect so that you can be proud of the finished product.

Getting the right measurements when you are trying to give your home a new look is important. You need to make sure that you are accurate and exact when you are refacing your kitchen cabinets. You need to take into consideration the face fame, the openings of the doors, and the actual cabinet. When you are off just a tiny bit you will see that the material will not fit right.

You have to take time to prepare the areas that you are refacing. You should remove all the cabinet drawers and the fronts of them. Clean everything well and get the grime off of the cabinets. You should also then make the smooth areas a little bit rough so that they can take in the materials of refacing. This is something that will take time and you should do it right.

If you do not know how to reface cabinets you should make sure that you are getting the proper help. You will also need to have patience and time to make it all happen. If you do not give yourself enough time to do this job you will see that you end up rushing and it will no be perfect.

What is needed for Cabinet Refacing?

The supplies that you need for cabinet refacing are offered at many of the home improvement stores. You will find that there are pictures and step-by-step directions to make this happen correctly. You will want to make your kitchen look as professionally done as possible.

Having pressure sensitive veneer will make the refacing so much easier. This is going to be a material that will be easy to use and will have a paper back that peels right off. You can line up the veneer to the right surface and put it in place. This area is going to need to be prepared correctly. Having a solid wood veneer is going to be the best way and the easiest for the refacing job that you are doing. Using a veneer roller can be a much easier way to apply the material. These items will come in a small and a large size. You will find that the larger ones will cover more than one area. You should always start at the middle and the move outwards. This will take out the air bubbles that can totally ruin the way that your refaced cabinets look.

Using a smoothing blade can be used when you are trying to attach the veneer. You should start in the middle and then go with the grain. Be sure to use both hands to give the right amount of pressure and do this until it is attached tightly.

Using edge band iron and trimmers can be good or refinishing. The band iron is going to be needed to hook the band to the edge of the cabinet door. An iron can also do this job for you as well but you will find it to be a large item to use.