Drying your car completely can minimize the need for water removal. Even after exiting a car wash dryer, take the time to wipe off water spots from the surface, windows, and tire rims.



If your car is frequently exposed to garden sprinklers, then hard water spots are inevitable. The first step to hard water removal is spotting the spot! Even on light-colored cars these water spots are easy to catch. If you don't remove them quickly, they can leave permanent dents on your car finish.

It is best to deal with them late in the afternoon, when the temperature is cooler. Or move your vehicle to a shaded area and let the surface cool down before attempting to do any water removal procedure. If your car surface is too hot, these water spots can be tough to eliminate and the minerals you want to eradicate will instead bore deeper into your paint.

The best home remedy for hard water removal is white vinegar. Combine water and vinegar in equal amounts in a spray bottle. Spray the solution on the car body and wipe it off with a soft, clean cloth. Vinegar can take away the gloss in your finish, so always have a tub of wax ready.

If you prefer a quick-fix and don't mind spending on it, car detailing shops offer lubricants and polishes specially developed for hard water removal. These products remove surface contaminants while polishing your car without leaving swirl marks.

To remove hard water spots on window glass, use a very fine grade of steel wool. Rub away the stains but be very careful not to damage the glass.

Flood water removal can be a bigger headache for car owners. Damage from flood waters can range from fogging inside headlamps or tail lights, to damp or muddy carpets and upholstery, to overhangs inside the wheel well.

Water can wreak havoc on electronic parts and removing silt from car interiors is no easy task. Sometimes water removal requires tearing the car apart piece-by-piece, cleaning it, disinfecting it, and putting it back together.

Consider this check list when doing flood water removal:

1. Check the engine oil and gas tank

2. Change oil if necessary

3. If the engine does not start, take out the spark plugs and remove water from the cylinders

4. Dry out the ignition system

5. Check all lights for trapped moisture

6. Check the glove compartment, console and trunk

7. Look under the hood and seats for water, dirt or rust

8. Check the exterior for crash damage

Clean and disinfect flood-damaged cars with a hot-pressure washer. Use air blowers and dehumidifiers to dry out the upholstery. Wet vacuum cleaners can be effective tools in flood water removal. Lastly, disinfect everything that has been soaked under the flood waterline.